Volvo S60 Owner's Manual page 342

09 Maintenance and service
Battery
09
NOTE
Tighten the screws to 30 Nm. Check the
torque with a torque wrench.
Fitting
1. Lower the battery into the battery box.
2. Move the battery inward and to the side
until it reaches the rear edge of the box.
3. Tighten the clamp that holds the battery.
4. Connect the ventilation hose.
> Check that it is correctly connected to
both battery and outlet in the body.
5. Connect the red positive cable.
6. Connect the black negative cable.
7. Press in the rear cover. (See Removal.)
1 Absorbed Glass Mat
*
340
Option/accessory, for more information, see Introduction.
8. Fit the rubber moulding. (See Removal.)
9. Align the front cover and secure it with the
clips. (See removal.)
For more information on the car's main battery
- see page 383.
Eco Start/Stop DRIVe*
Cars with the Start/Stop function are equipped
with two 12 V batteries - one extra powerful
battery for starting and one support battery
that helps during the Eco Start/Stop DRIVe
function's starting sequence.
For more information on Start/Stop - see
page 123.
For more information on the car's main battery
- see page 116 and 383.
Battery Start
Cold start
A
capacity , 760
CCA (A)
B
Size ,
278×175×
L×W×H
190
(mm)
Capacity
70
(Ah)
A
In accordance with the SAE standard.
B Largest possible size.
IMPORTANT
When replacing batteries in cars with the
1
Start/Stop function, the AGM
ies must be fitted.
Support
180
150×90×130
10
type batter-