Volvo S60 Owner's Manual page 271

To skip a lesson and go to the next one, press
the button for voice recognition and say
"Next". Go back to the previous lesson by say-
ing "Previous".
Exit the instructions by means of a long press
on the button for voice recognition.
Voice training
The system displays up to fifteen phrases for
you to say. Voice training can be started in the
menu system MY CAR under Settings
Voice settings Voice training. Choose
User 1 User 2
between or . For a description
of the menu system, see page 198.
After voice training has been completed,
remember to set your user profile under
user setting .
Additional settings in MY CAR
•
User setting - Two user profiles can be
set, the function is activated in the menu
system MY CAR under Settings
settings Voice user setting. Choose
between User 1 or User 2 . For a descrip-
tion of the menu system, see page 198.
•
Voice volume - Can be changed in the
menu system MY CAR under
Voice settings Voice output
For a description of the menu system, see
page 198.
Using voice commands
The driver initiates a dialogue with the voice
commands by pressing the button for voice
recognition (see illustration on page 268).
Once a dialogue has been started, commonly
used commands will be shown in the TV
screen. Greyed-out text or text within brackets
is not included in the spoken command.
When the driver becomes accustomed to the
system, he/she can speed up the command
dialogue and skip the prompts from the sys-
tem, by briefly pressing the button for voice
recognition.
Commands can be given in several ways
Voice
The command "Phone call contact" can be
pronounced as e.g.:
•
"Phone > Call contact" - Say "Phone", wait
for the system's reply, and then continue
by saying "Call contact."
Voice
or
•
"Phone call contact" - Say the whole com-
mand in one sequence.
Quick commands
Quick commands for the phone can be found
Settings
in the menu system MY CAR under
volume.
Voice settings
Phone commands
06 Infotainment system
Voice recognition* mobile phone
For a description of the menu system, see
page 198.
Dial a number
The system understands the numbers 0 (zero)
to 9 (nine). These numbers can be pronounced
individually, in groups of several numbers at a
time, or the whole number all at once. Numbers
greater than 9 (nine) cannot be handled by the
system, e.g. 10 (ten) or 11 (eleven) are not pos-
sible.
The following is an example of a dialogue with
voice commands. The system's reply will vary
depending on the situation.
The user starts the dialogue by saying:
Phone > call number
or
Phone call number
System reply
Number?
User action
Start saying the numbers (as individual units,
i.e. six-eight-seven, etc.) in the phone number.
If you say several numbers and pause, the sys-
tem will repeat them, and then say "Continue".
Settings
Continue to say the numbers. When finished,
Voice command list finish the command by saying "Call".
and General commands .
•
*
Option/accessory, for more information, see Introduction.
You can also change the number by saying
the commands "Correct" (which deletes
06
``
269