Accessories; To Add The Keyless Entry - Chamberlain 1280 Owner's Manual

Accessories Available For Your Opener
Outside Quick Release:
Model 1702LM
Required for a garage with NO
access door.
Model 1778LM 8 foot Complete Rail:
To allow an 8 foot door to open fully.
Model 1770LM 10 foot Complete Rail:
To allow a 10 foot door to open fully.
Extension Brackets:
Model 97LM
(Optional) For safety sensor
installation onto the wall or floor.
Model 976LM
SECURITY Keyless Entry:
Enables homeowner to operate
garage door opener from outside by
entering code on specially designed
keyboard. Also can add a temporary
pass code for visitors or service
persons. This temporary code can
be limited to a programmable
number of hours or entries.
We recommend that you program your code
before you install the Keyless Entry. You will not
need assistance, and you can test the reception at
the mounting location before installation.
1. Choose a 4-digit code using numbers from 0 to 9
(a number can be used more than once, for
example, 4, 0, 4, 1).
2. Press the four buttons for the code, then press
and hold the Enter button. The indicator light on
the door opener panel will blink.
3. Press and release the "Smart" (learn) button on
the opener panel. After the opener lights flash,
release the Enter button.
Test by pressing the the code, then press Enter. The
door should begin to move.
Model 59LM
Model 973LM
Model 974LM
Model 970LM
Model 98LM

To Add the Keyless Entry

You may also program the Keyless Entry from the
Multi-Function Door Control, as follows:
1. With the door closed, enter the four digit code
desired, then press and hold Enter.
2. Press and hold the light button on the door control.
3. Press and hold the door control push bar.
4. After the opener lights flash, release all buttons.
34
Outside Keylock:
Opens the garage door
automatically from outside when
remote control is not handy.
SECURITY 3-Channel
Remote Control:
Includes visor clip.
SECURITY 4-Channel
Remote Control:
Includes visor clip.
SECURITY 3-Channel Mini
Remote Control:
With key ring and Velco fastening
strip.
Passive Infrared Control Console:
Multi-function door control with
motion sensor that automatically
turns opener lights on for 5 minutes
when it detects a person entering
the garage. Sensor can be easily
deactivated when desired.