KitchenAid KGRS505XWH04 Installation Instructions Manual page 16

To Convert Gas Pressure Regulator
1. Locate gas pressure regulator at the rear of the range.
E l
A. Gas pressure regulator
IMPORTANT: Do not remove the gas pressure regulator.
2. Unscrew the regulator cap and remove the plastic cover.
3. Push the bake burner cover to the right.
4=
5.
A
A. Bakeburner cover
Lift up and remove oven bake burner cover.
Unscrew wing nut and remove oven baffle.
A. Plastic cover
B. Regulator cap
3. Flip the regulator cap over and replace the plastic cover.
B
A
A. Oven baffle
B. Wing nut
6. Remove the oven bake burner screw and set aside.
7. Gently set the bake burner to the side.
A. LP gas position
B. Natural gas position
C. Plastic cover
4. Screw the regulator cap securely back into place. Do not
overtighten.
To Convert Oven Bake Burners
To Convert Lower Oven Bake Burner:
1. Remove oven racks from inside the oven cavity.
2. Remove oven door. See "Oven Door" section in the Use and
Care Guide for oven door removal instructions.
B
A. Igniter and wires
B. Bake burner screw
16