Changing A Fuse - PEUGEOT RCZ Handbook

CHANGING A FUSE

ACCESS TO THE TOOLS
The extraction tweezer is fi tted to the back of the dashboard fusebox
cover.
To gain access to them:
turn the screw a quarter of a turn to the left,
unclip the cover by pulling at the top right,
remove the cover completely and turn it over,
remove the carrier on which is fi tted the tweezer.
CHANGING A FUSE
Before changing a fuse, tit is necessary to:
identify the cause and correct it,
switch off all electrical consumers,
immobilise the vehicle and switch off the ignition,
identify the failed fuse using the allocation tables and drawings
presented on the following pages.
To replace a fuse, you must:
- use the special tweezer to extract the fuse from its housing and
check the condition of its fi lament,
- always replace a failed fuse with a fuse of the same rating (same
colour); a different rating fuse may cause malfunctions (risk of fi re).
If the fault recurs soon after changing a fuse, have the electrical
system of your vehicle checked by a PEUGEOT dealer or a
qualifi ed workshop.
Good Failed
Tweezer