PEUGEOT RCZ Handbook page 126

"ISOFIX" MOUNTINGS
Your vehicle is approved with regulation ISOFIX mountings.
The diagram below indicates which seats are fi tted with these ISOFIX
mountings:
These are three rings for each seat:
- two rings A , located between the vehicle seat back and cushion,
indicated by a label,
- a ring B referred to as the TOP TETHER , located under a cover
behind the top of the backrest for fi xing the upper strap.
This ISOFIX mounting system provides fast, reliable and safe fi tting of
the child seat in your vehicle.
The ISOFIX child seats are fi tted with two locks which are secured
easily on the two rings A .
Some also have a top tether strap which is attached to ring B .
To attach this strap, open the cover at the top of the backrest. Then fi x
the hook on ring B and tighten the top tether strap.
The incorrect installation of a child seat in a vehicle compromises
the child's protection in the event of an accident.
For information regarding the possibilities for installing ISOFIX
child seats in your vehicle, refer to the ISOFIX child seat locations
table.