PEUGEOT RCZ Handbook page 180

Changing reversing lamps and foglamps
These two bulbs are changed from outside the rear bumper:
unclip the protective cover from the rear, then tilt it,
remove it completely to gain access to the two lamp fi xing bolts,
turn these two bolts one quarter of a turn and remove them,
push the lamp towards the inside to unclip it, then tilt it,
pull the lamp towards the outside for access to the various
bulb-holders.
- For the reversing lamps: pull the corresponding bulb holder,
- turn the bulb one quarter of a turn and change it.
- For the foglamp: turn the bulb holder one quarter of a turn and
remove it,
- turn the bulb one quarter of a turn and change it.
To refi t, carry out these operations in reverse order.
On the left-hand side, take care not to touch the silencer; risk
of burns, if you change the bulb immediately after switching
off the ignition.