Number Plate Lamps; Third Brake Lamp - PEUGEOT 107 Handbook

Practical information

Number plate lamps

(W 5 W)
Pass your hand under the bumper.
Remove the bulb holder turning it one
quarter of a turn.
Remove the bulb and change it.
70

Third brake lamp

(Four W 5 W bulbs)
Unscrew the 2 fixing screws A.
Release the lamp unit by pushing the two
tabs B inwards.
Disconnect the connector and the rear
screen wash pipe.
Remove the bulb holder.
Remove the bulb and change it.
When refitting, proceed in the reverse order and
ensure that the lamp unit seal and the rear screen
wash pipe have been put back in place correctly.
Do not tighten the screws more than is
necessary, to avoid the risk of breaking
the lamp.
repeaters (WY 5 W amber)
Push the repeater forwards or rearwards
and detach it by pulling towards you.
Disconnect the bulb holder and change it.