Warning Labels; Control And Functions - American DJ Krypto Sync User Instructions

Enlarged version

Krypto Sync™

DANGER

VISIBLE LASER RADIATION

-AVOID DIRECT EYE EXPOSURE

LASER DIODE

WAVELENGTH : 635~650 nm

Max Output : <4.9mW

Class IIIa Laser Product

American DJ

- www.americandj.com - Krypto Sync™ Instruction Manual Page 7

Warning Labels

Krypto Sync™

1. Pattern Knob 2 - This knob, when adjusted, generates different

patterns when in manual mode.

2. Pattern Knob 1 - This knob, when adjusted, generates different

patterns when in manual mode.

3. Mode Switch - This button is used to switch stand-alone mode

or sound active, master/slave mode. When the switch is in the left pos-

tion sound active, master/slave mode will be active. When the switch

is in the right postion stand-alone manual mode will be active.

4. Scene Elapsed Time Adjust Knob - This knob will only work in

Sound Active mode. This knob adjusts the time it takes for the pattern

to change. When the knob is turned to the maximum level it will take 8

seconds for the pattern to change.

5. Signal Output - This output connection is used when linking unit's

in master/slave configuration. The connection uses a 3.5mm stereo

microphone jack. Output is used when the unit has been selected as

the master, and when linking more than one slave.

6. Signal Input - This input connection is used when linking unit's

8 7 6