HP DL580 Quickspecs page 12

QuickSpecs
Standard Features
Serviceability Serviceability Serviceability Serviceability
Security Security Security Security
Power Regulator Power Regulator Power Regulator Power Regulator
Server Power Cords Server Power Cords Server Power Cords Server Power Cords
Front and Rear accessibility provides unsurpassed serviceability by allowing the server to remain
safely secured in the rack while maintaining Hot Plug RAID Memory, Hot Plug Universal Hard
Drives, Hot Plug Redundant Power Supplies, as well as Processors and Processor Power Modules.
Innovative Diagnostic Lighting
QuickFind Diagnostic Display - precisely depicts all major subsystems of the server (PCI-X I/O,
Memory, CPU, Redundant Cooling, Interlock, Thermtrip) and gives instant visual indication of fault
status. Located on top front of server.
LED display on front panel indicates power, internal health, external health, Unit ID light.
LED display on Memory board indicates Memory status, health, and protection mode.
LED display on Processor board indicates Processor and Processor Power Module health.
Tool-less, virtually cable-less interior design
Tool-less access to interior of server
Up to two, Slimline media drives are removable without the use of tools (ejectable)
Rear Access to Hot Plug Redundant Power Supplies
PCI Card Guides locks full length PCI cards in place
SCSI Duplex/Simplex Drive Cage connects directly to system board - no cables.
NOTE: NOTE: NOTE: NOTE: Configure your SCSI Duplex/Simplex Drive Cage by means of simple switch (duplex
to simplex) located on the cage itself. System ships standard in Duplex mode.
Six individually removable fans connect without cables to the system board
Processor/PPM Retention Cage securely locks Processors into their sockets
Tool-less removal of system board
Quick Deploy Rails
Tool-less design "snap in" rail and ambidextrous cable management arm
Power-on password
Keyboard password
Diskette drive control
Diskette boot control
Network Server Mode
Serial interface control
Administrator's password
Removable Diskette drive (optional)
Removable CD-ROM or DVD drive
Power Regulator is a new operating system-independent power management feature of HP ProLiant
servers that enables dynamic or static changes in CPU performance and power states. In dynamic power
mode, Power Regulator automatically adjusts the server's power usage and performance to match CPU
application activity. This improves server energy efficiency by giving CPUs full power for applications
when they need it and enabling power savings without performance degradation when application
activity is reduced.
NOTE: NOTE: NOTE: NOTE: For HP ProLiant DL580 server, a C19 to C20 2.8M jumper cord ships standard. If customers
require a local power cord, they can check the power cord matrix for the appropriate county specific sku.
Please see the following power cord matrix for details:
DA - 12195 Canada — Version 30 — May 14, 2007
HP ProLiant DL580 Generation 3 (G3) HP ProLiant DL580 Generation 3 (G3) HP ProLiant DL580 Generation 3 (G3) HP ProLiant DL580 Generation 3 (G3)
http://www.hp.com/go/powercordmatrix
Page 12