ARCH
HI-FLOW KITCHEN FAUCET
with SIDE SPRAY
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
RECOMMENDED
TOOLS
1
INSTALL FAUCET WITH DECK ESCUTCHEON
(4101.351)
Installation with DECK ESCUTCHEON:
surface is uneven. Place ESCUTCHEON (1) onto sink or mounting surface with large opening to the right as
supply HOSES (2) and SHANK (3) through ESCUTCHEON (1) and mounting surface. Make sure slot in fitting base aligns
with tab on ESCUTCHEON (1). Figure 1.
Assemble RUBBER WASHER (4), BRASS WASHER (5), and threaded LOCKNUT (6) onto SHANK (3) from underside
of sink or mounting surface. Hand tighten LOCKNUT (6) and check that rotation of HANDLE (7) from HOT to COLD
is centered.
Use a screwdriver to tighten SCREWS (8) on LOCKNUT (6). Work your way around LOCKNUT (6), tightening the
SCREWS (8) slightly each time until all are snug to ensure even pressure.
Install SPRAY HOLDER:
thread LOCKNUT (12) onto SPRAY HOLDER (11) shank and tighten.
Install SPOUT ASSEMBLY:
Make sure slot in spout base aligns with tab on ESCUTCHEON (1). Figure 2.
Assemble RUBBER WASHER (4a), BRASS WASHER (5a), and threaded LOCKNUT (6a) onto SHANK (10) from underside
of sink or mounting surface. Hand tighten LOCKNUT (6a). Use a screwdriver to tighten SCREWS (8a) on LOCKNUT (6a)
the same as fitting installation above.
Figure 1
1
11
12
Installation
Instructions
Adjustable Wrench
Apply a light bead of plumbers putty to underside of ESCUTCHEON (1) if mounting
Insert SPRAY HOLDER (11) into ESCUTCHEON (1). From underside of sink or mounting surface
Insert SPRAY HOSE (9) and SHANK (10) through ESCUTCHEON (1) and mounting surface.
SLOT
3
ALIGN SLOT
AND TAB
2
TAB
4
5
6
8
4101.301
Regular Screwdriver
Turn off water at
CAUTION
main supply.
7
Figure 2
ALIGN SLOT
AND TAB
1
4101.301 shown with
optional escutcheon 4101.000P
Certified to comply with ANSI A112.18.1M
Phillips Screwdriver
SLOT
10
TAB
4a
5a
6a
8a
9
4 1 0 1 . 3 0 1
M 9 6 8 5 8 3
Channel Locks
shown.
Insert