Moving The Range; Phone Directory Under "Appliances -- Household; Major -- Service And Repaid; Both Numbers Are Listed On The Model/Serial - Whirlpool GY395LXGQ3 Installation Instructions Manual

if range does not
operate;
[_ Check that the circuit breaker is
not tripped or the house fuse
blown.
[_ Check that the power suppUy cord
is pUugged into the outlet.
[_ See Use and Care Guide for
troubUeshoofing Uist.
If you need
Ufyou have questions about operating,
cleaning or maintaining your range:
[_ Refer to Use and Care Guide.
[_ Call the Consumer Assistance
Center. Check your Use and Care
Guide for a toll-free number to call
or call the deaUer from whom you
purchased this appUiance.The deaUer
is Uisted in theYeHow Pages of your
phone directory under "Appliances
-- Household --
Major -- Service and Repair:'
mfyou need
m
serv|ce:
Maintain the quality built into your range
by ca[ling an authorized service
company.
To obtain the name and number of the
authorized service company:
[_ Contact the dealer from whom
you purchased your range; or
[_ Look in theYellow Pages of your
telephone directory under
"Appliances- Household --
Major -- Service and Repair;" or
[_ Call the Consumer Assistance
Center.The toll-free number is
listed in your Use and Care
Guide.
When you ca[[, you wi[[ need:
[_ The range model number.
[_ The range serial number.
Both numbers are listed on the
model/serial rating plate located on
the oven frame behind the storage
drawer panel.
Moving the range:
Tip Over Hazard
A child or adult can tip the range
and be killed.
Connect anti=tip bracket to rear
range foot.
Reconnect the anti=tip bracket, if
the range is moved.
Failure to follow these instructions
can result in death or serious
burns to children and adults.
When moving range, slide range onto
cardboard or hardboard to prevent
damaging the floor covering.
If removing the range is necessary for
cleaning or maintenance:
1. Unplug range or disconnect power.
2. Slide range forward to complete
cleaning or maintenance.
anti=tip
range foot
3. Make sure the anti-tip bracket is
installed:
• Look for the anti-tip bracket
securely attached to floor.
, Slide range back so rear range
foot is under anti-tip bracket.
4. Check that range is level.
5. Plug in range or reconnect power.
10