Map Display Menu - Mercedes-Benz COMAND Operator's Manual

i
During route guidance, a symbol will
appear on the left-hand side of the bot-
tom status bar if map display is
switched ON.
North symbol :
Fixed map orientation, north is al-
ways pointing up,
Compass symbol :
Dynamic map orientation, driving
direction is always pointing up.

Map display menu

You can set the following to be displayed in
the status bar:
Time of arrival/Dist. to Dest.
If the full-screen map display is activat-
ed ( page 131), the estimated time of
arrival and the remaining distance to
the destination will be displayed. If you
have entered a stopover destination
( page 140), the corresponding data
will be displayed.
Current-Location display
If the full-screen map display is activat-
ed ( page 131), the following data will
be displayed:
The current position as coordi-
nates.
The number of satellites that can
currently be received.
The current elevation (ALT = alti-
tude) above sea level.
i
The COMAND uses GPS to calculate
the elevation above sea level. For rea-
sons of tolerance, this value may devi-
ate from the actual value.
No display
The name of the current road is dis-
played.
Navigation*
During route guidance
In the Display menu ( page 143),
press the Map soft key.
The possible options appear.
i
The solid circle shows the current
setting.
Use or to select the desired
option.
Press .
The map display is switched.
Finally, press the Back soft key or wait
for the screen to change.
145