Mercedes-Benz COMAND Operator's Manual page 124

Navigation*
Destination entry
Memory soft key
The current map location is stored
( page 126).
Display soft key
You can select which POIs will appear
as symbols on the map ( page 143).
i
The soft keys Coord. , Memory
play are visible only if the map has
been called up using
soft key
The map scale will change to display a
more detailed map.
soft key
The map scale will change to display a
map that shows a wider area.
124
Moving the map and selecting a desti-
nation
Move the cursor using
or
,
destination.
Release the button.
If the system finds a street name at the
location the cursor is pointing to, the
and Dis-
corresponding street name is shown in
the status bar.
.
In this example:
, , ,
to select the desired
Start route guidance to the selected
destination
WATER ST
i
The destination selection will be lost
when pressing the Back soft key.
The system reverses to the details of
the previously entered destination.
Press .
The Start Route Guidance menu ap-
pears if route guidance has not yet
been activated.
Press .
Route calculation begins.
If route guidance is already active, you
will be prompted to confirm that you
wish to accept the new destination.
Press to select Yes .
Press .
Route calculation begins.