Mercedes-Benz COMAND Operator's Manual page 142

Navigation*
During route guidance
Press the Details soft key, if you want
to see details of the selected destina-
tion.
The details disappear again after
approx. 3 seconds, or when pressing
the Details soft key again.
Press to confirm the selection of a
destination.
The system begins to calculate the
route to the selected stop-over destina-
tion.
Changing/deleting stop-over destina-
tions
Show the soft key displays
( page 136).
.
i
A stop-over destination can be
changed or deleted only while the route
guidance to this stop-over is active (in-
dicated by ).
142
i
If no route guidance to a stop-over des-
tination is active yet ( page 140).
Press the St-over soft key.
The menu for deleting or changing the
stop-over destination appears.
Use to select the
Delete active stopover entry.
Press .
This will delete the stop-over. The sys-
tem calculates the route to the final
destination;
or
Use to select the
Replace active stopover
Press .
The stop-over is deleted, a new stop-
over destination can be entered
( page 140).
entry.