JVC GZ-MG730 Manual Book page 7

Make a backup of important
recorded data
JVC will not be responsible for any lost
data. It is recommended to copy your
important recorded data to a DVD or other
recording media for storage. (p. 44)
Make a trial recording
Before the actual recording of important
data, make a trial recording and play back
the recorded data to check that the video
and sound have been recorded correctly.
Reset the camera if it does
not operate correctly
This camera uses a microcomputer.
Factors such as background noise and
interference can prevent it from operating
correctly. If the camera does not operate
correctly, reset the camera. (p. 69)
Precautions on handling
batteries
•
Be sure to use the JVC BN-VF808U/
VF815U/VF823U battery packs.
•
If the camera is subjected to electrostatic
discharge, turn the power off before using
it again.
If a malfunction occurs, stop
using the camera immediately
and consult your local JVC
dealer
•
If a problem occurs when using the
microSD card, take the card together with
the camera for repair. If one of them is
not included, the cause of the malfunction
cannot be diagnosed, and the camera
cannot be repaired.
•
Recorded data may be erased while the
camera is being repaired or inspected.
Back up all data before requesting repairs
or inspections.
Because the camera may be
used for demonstration in a
shop, the demonstration mode
is set to [ON] by default
To deactivate the demonstration mode, set
[DEMO MODE] to [OFF]. (p. 67)
When connecting the camera
to other devices using an
optional DV cable, make sure
to follow the procedure below.
Connecting the cable incorrectly
may cause malfunctions to the
camera and/or other devices.
•
Connect the DV cable first to the device,
and then to the camera.
•
Connect the DV cable (plugs) correctly
according to the shape of the DV
connector.