Manual Recording
Manual Setting in Function Menu
You can use manual recording functions
easily by selecting items in the function
menus.
Preparation:
Set the program AE dial to "3".
1
Touch the MENU button.
2
Select [MANUAL SETTING].
3
Select the desired menu.
For details on each menu, see below.
Menus
ADJUST BRIGHTNESS
Adjusts the brightness.
FOCUS
Adjusts the focus.
(Continued)
MANUAL SETTING
ADJUST BRIGHTNESS
FOCUS
WB
PHOTOMETRY AREA
ADJUST BRIGHTNESS
!
For
mode
[AUTO]: The brightness is adjusted automatically.
–6 to +6: Corrects the brightness within this range in increments of
1.
#
For
mode
[±0]: The brightness is not adjusted.
–2.0 to +2.0 (EV): Corrects the brightness within this range in
increments of 1/3EV.
L
To lock the exposure
When the menu disappears after you finish configuring the
setting, select [LOCK]. The
[AUTO]: The focus is adjusted automatically.
focus is adjusted automatically.
@ 9 : A
: Adjusts the focus manually. (When zooming, the
subject will not go out of focus if you adjust the focus at the
telephoto (T) side before zooming to the wide-angle (W)
side.)
4
Select the desired setting.
Depending on the kind of settings you
select, you can set the value by using the
touch sensor.
The menu disappears and the indicator for
the set function appears.
L
To return to the previous screen
@
Select
.
L
To quit the screen
Touch the MENU button.
Settings: [ ] = Factory-preset
C
indicator appears.
MANUAL SETTING
ADJUST BRIGHTNESS
AUTO
MANUAL
FOCUS
WB
PHOTOMETRY AREA
ADJUST BRIGHTNESS