JVC GZ-MG730 Manual Book page 65

Menus
n
IMAGE QUALITY
Enables you to set the picture quality
for still images.
y
IMAGE SIZE
Enables you to select the picture size
for still images.
p
GAIN UP GAIN UP
Makes the subject appear bright
automatically when you record in dark
places. However, the overall colour
tones appear greyish.
2 GAIN
You can set the ISO setting to
increase the sensitivity in dark
conditions.
! SELECT ASPECT RATIO
Enable you to select the aspect ratio
for videos.
@
ZOOM ZOOM
Enables you to set the maximum zoom
ratio.
q
DIS DIS
Compensates for hand shake.
o
WIND CUT
Reduces noise caused by wind.
A
SWITCH TO ANALOG I/O
Switches input and output for the
AV/S-Video jack of the camera.
Settings: [ ] = Factory-preset
[FINE] / STANDARD
[GZ-MG730]
[3072 x 2304] / 2592 x 1944 / 1600 x 1200 / 640 x 480 /
3072 x 1728 / 2592 x 1456 / 1920 x 1080 / 1280 x 720
[GZ-MG530]
[2592 x 1944] / 2304 x 1728 / 1600 x 1200 / 640 x 480 /
2592 x 1456 / 1920 x 1080 / 1280 x 720
OFF: Disables the function.
[ON]: Activates the function.
[AUTO] / ISO50 / ISO100 / ISO200 /
ISO400 / ISO1000
4:3: Records videos in 4:3 size.
[16:9]: Records videos in 16:9 size.
The 16:9 indicator lights up on the LCD monitor.
NOTES
•
If the [VIDEO QUALITY] is set to [ECONOMY], you
cannot record in 16:9 size.
•
If you want to copy the recorded videos onto DVD discs,
it is recommended not to mix 16:9 size videos and
4:3 size videos.
•
If you record videos in 16:9 size, the aspect ratio of the
video may be incorrect when watching the videos on TV.
If this occurs, change the settings in [SELECT TV TYPE].
(p. 67)
10X / [40X] / 300X
NOTE
Optical zoom is used up to 10X. Digital zoom is used from
more than 10X up to the selected zoom ratio.
OFF: Disables the function.
[ON]: Activates the function.
NOTES
•
Accurate stabilization may not be possible if hand shake
is excessive, or depending on the shooting conditions.
•
Set this mode to [OFF] when recording with the camera
on a tripod.
[OFF]: Disables the function.
ON: Activates the function.
[OUTPUT]: Switches to output.
I/O: Switches to input. The
LCD monitor.
A
indicator lights up on the