HP dx2200 Specifications page 10

QuickSpecs
System Details
Power Conservation Power Conservation Power Conservation Power Conservation
'Energy Saver' 'Energy Saver' 'Energy Saver' 'Energy Saver'
System Environmental System Environmental System Environmental System Environmental
Specs Specs Specs Specs
Energy Star compliant
APM 1.2 support
Screen blanking
Hard drive 'Idle' mode
System Idle mode
Blue Angel compliant (<5w in S5 – power off)
~2 watt power consumption in ES mode – suspend to RAM (S3) (instantly available PC)
Processor/Cache memory power-down (S3)
Values are subject to change without notification and are for reference only.
Performance of system, options, and ancillary equipment will vary depending on the system
configuration.
Levels presented do not account for non-HP/Compaq installed hardware.
Ambient Air Temperature Operating Ambient Air Temperature Ambient Air Temperature Ambient Air Temperature
Humidity Humidity Humidity Humidity
Altitude Altitude Altitude Altitude
Shock Shock Shock Shock
Vibration Vibration Vibration Vibration
DA - 12426 North America — Version 14 — August 16, 2006
HP Compaq dx2200 Microtower Business PC HP Compaq dx2200 Microtower Business PC HP Compaq dx2200 Microtower Business PC HP Compaq dx2200 Microtower Business PC
Operating Operating Operating
Storage Storage Storage Storage
Operating Operating Operating Operating
Storage Storage Storage Storage
Operating Operating Operating Operating
Non-Operating Non-Operating Non-Operating Non-Operating
Listed are the levels of shock the product can withstand with NO damage
being incurred. The values represent peak input acceleration during an 2~3
ms half-sine shock pulse, 11 ms trapezoidal shock pulse.
Non-Operating Non-Operating Non-Operating Non-Operating
Listed are the levels of vibration the product can withstand with NO damage
being incurred. The values represent a flat random vibration input
acceleration profile across the given frequency range.
Operating Operating Operating Operating
Non-Operating Non-Operating Non-Operating Non-Operating
50° to 95°F (10° to 35°C) at sea level with an
altitude de-rating of 1.0°C per every 1000 ft
(300 m) above sea level to a maximum of 8000
ft (2500 m), no direct sustained sunlight.
Maximum rate of change is 77°F/Hr (25°C/Hr).
The upper limit may be limited by the type and
number of options installed.
-22° to 140°F (-30° to 60°C) –
Maximum rate of change: 410°F/Hr (210°C/Hr).
10% to 90% relative humidity (Rh), 86°F (30°C)
maximum wet bulb temperature, non-condensing
10% to 95% relative humidity (Rh), 101.66°F
(38.7°C) maximum wet bulb temperature, non-
condensing
0 to 10,000 feet (0 to 3048 meters) – This value
may be limited by the type and number of
options installed. Maximum allowable altitude
change rate is 1,000 ft/min (304.8 m/min).
0 to 30,000 feet (0 to 9,144 meters) – Maximum
allowable altitude change rate is 1200 ft/min
(365.76 m/min).
35G's (Half-sine Shock)
35G's (Trapezoidal Shock)
Random vibration at 5Hz@0.00025G
2
10Hz@0.01G /Hz, 100Hz@0.01G
2
300Hz@0.00001G /Hz
5Hz to 300Hz, (0.25G's nominal).
Random vibration at 0.008G²/Hz,
10Hz to 500Hz, (2 Grms nominal).
2
/Hz,
2
/Hz,
Page 10