Using Process; Preparation Before Washing - Haier XQB50-20 User Manual

1 Preparation before washing

Pay attention to followings before washing the laundries
Confirm if there's Clear the pocket.
special requirement Take out the coins,
for the laundries. sand, hairpins etc.
a. Check if the laundries are applicable for washing with the machine.
b. Divide the laundries with unfast color from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil,
please apply detergent in advance, which can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn it over before putting in.
f. Do not put those laundries polluted by chemicals directly into the washing machine.
g. For those small laundries and those may get twisting or worn, and woolen/fur laundries, please put them into
mesh bag for washing.
Preparation before washing
1. Connect the water inlet hose.
2. Confirm that the washing machine is earthed
reliably. Then insert the power plug into the
receptacle. Do not connect the earth terminal
to the gas pipe and tap water pipe.
3.Put down the drain hose.
Fasten the buttons The quantity of the
and zippers. laundries shall not
exceed the rated value.
The big laundries like
the jeans shall be put
in loosely.

Using process

Using process
When the pulsator is
running, the buttons of
the laundries may cause
noise. For the sake of
discretion, please put
the laundries with
buttons into other
laundries.
7