Drive Chain Lubrication - Honda 2004 CRF150F Owner's Manual

1. Hold the axle ( ) and loosen the rear axle 1
nut ( ). 2
2. Turn both the right and left adjusters ( )
equally to increase or decrease chain slack.
3. After adjusting, be sure the same adjuster
index marks ( ) align with the stopper pins 4
( ) on both sides of the swingarm. 5
4. Torque the rear axle nut to:
80 lbf·ft (108 N·m , 11.0 kgf·m)
5. Recheck drive chain slack.
6. Check rear brake pedal freeplay and adjust
as necessary (page
when repositioning the rear wheel to adjust
drive chain slack.
If a torque wrench is not used for this
installation, see your Honda dealer as soon as
possible to verify proper assembly.
3
88 ). Freeplay is affected
Lubrication
Lubricate every 300 miles (500 km) or sooner
if chain appears dry.
The O-rings in this chain can be damaged by
steam cleaning, high pressure washers, and
certain solvents.
Drive Chain
(cont'd)
Servicing Your Honda
107