Honda 2004 CRF150F Owner's Manual page 105

Wheels
Rear Wheel Removal
RIGHT REAR
(2)
(1)
(3)
(5)
(4)
(1) brake adjuster
(2) brake rod
(3) brake arm
96
Servicing Your Honda
LEFT REAR
(6)
(5)
(4) axle nut
(5) chain adjusters
(6) rear axle
Removal
1. Raise the rear wheel off the ground by
placing a maintenance stand or support block
under the engine. Secure the front of the
motorcycle with tie-down straps.
2. Unscrew the rear brake adjuster ( ). Press
the rear brake pedal and disconnect the brake
rod ( ) from the brake arm ( ). 2
3. Loosen the rear axle nut ( ) while holding
the axle.
4. Turn both adjusters ( ) so the rear wheel can
be moved all the way forward for maximum
drive chain slack.
5. Unscrew the axle nut ( ). Pull the axle out.
Push the wheel forward and derail the drive
chain from the rear sprocket. Remove the
wheel.
Take care to prevent getting grease, oil, or
dirt on the brake shoe surfaces. This can
cause poor brake performance or rapid brake
shoe wear after reassembly.
1
3
4
5
4