Table of Contents
Advertisement
Rear Fender Removal
Refer to
Saf ety Precautions
The rear fender must be removed for the
rear wheel removal.
Removal
1.
Open both the right and left saddlebags
(page
46
).
2.
Remove the bolts A ( ), bolts B ( )
and screw ( ) then pull out the rear
3
fender ( ).
4
3.
Turn the socket ( ) counterclockwise,
5
then pull it out.
96
Servicing Your Honda
on page
78
.
1
2
Installation
1.
Insert the socket to the rear fender and
turn it clockwise.
2.
Install the right edge of rear fender first,
then insert the prongs ( ) into the
grommets ( ).
7
3.
Install the left edge of rear fender.
4.
Tighten the bolts A, bolts B and screw.
5.
Close both the right and left saddlebags
(page
47
).
6
Advertisement
Chapters
Table of Contents
