Washing sequence
Wash timer
Wash selector Water-filling entrance
(To set to below 2 minute,
(standard current,
first set to 5 minute then
strong current)
turn it back. it can increase
the service life of the timer).
OFF
STAMDARD
9
WASH SELECTOR
WASH TIMER
Wash
1. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 1)
Run washing program for some time to stir and
dissolve the powder completely.
2.Put in the laundries. If the water quantity is
insufficient, please add water.
3.Select the current.
Select the strength of the current according to
the laundries. (Figure 2)
4.Select the washing time
Select the washing time according to the laundries.
(Figure 3)
5.After washing, set the "WASH
SELECTOR" at "DRAIN". (Figure 4).
STRONG
DRAIN
Water-filling entrance
Using process
Using process
Spin timer
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
OFF
SPIN TIMER
Figure 1
STRONG
STANDARD
DRAIN
WASH SELECTOR
OFF
WASH TIMER
STRONG
STANDARD
DRAIN
WASH SELECTOR
3 3
Figure 2
Figure 3
Figure 4