Ford 2013 F-650 Owner's Manual page 206

Ford f-650/750
Hide thumbs Also See for 2013 F-650:
Table of Contents

Advertisement

WARNING: The use of inferior parts can adversely affect the
quality and reliability of your vehicle which, in turn, can result in
property damage, personal injury or death.
To avoid damage to the vehicle's electrical components prior to electric
welding:
• disconnect both battery cables.
• attach the welder ground cable as close as possible to the part being
welded.
• it is recommended that the component be temporarily removed if
welding close to an electrical component.
Follow the checks and services in the Scheduled Maintenance chapter.
Have your dealer or service center inspect your vehicle at least once a
year. Remember that regular maintenance and inspections usually
prevent serious problems from developing later.
If the owner or operator of the vehicle is a skilled technician and intends
on performing the vehicle maintenance and service, he is strongly urged
to purchase a service manual.
Electrical System
Periodically inspect electrical connectors on the outside of the cab and
on the engine and frame for corrosion and tightness. Exposed terminals,
such as the fuel sender, cranking motor, alternator and feed-through
studs, should be cleaned and re-coated with a lubricant sealing grease
such as Motorcraft® Silicone Brake Caliper Grease and Dielectic
Compound XG-3, or equivalent. This should include the ground cable
connector for batteries, engine and cab as well as the jump starting stud.
Accessory Feed Connections
Vehicle electrical systems are complex and often include powertrain
components, such as engine and transmission controls, instrument
panels, ABS, etc. While most systems operate on battery voltage
(12 volts), some systems can be as high as 90 volts or as low as five
volts. See the Electrical Circuit Diagram Manuals, available from your
vehicle's manufacturer, to make sure that any additional body lights and
accessories are connected to circuits that are both appropriate and not
overloaded. No modification should be made to any vehicle control
system without first contacting your dealer.
2013 F-650/750 (f67)
Owners Guide gf, 2nd Printing, March 2013
USA (fus)
Maintenance
205

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2013 f-750

Table of Contents