Advertisement
Install the water inlet hose
Confirm the water faucet
Water faucet,suitable
Outlet end surface
It is required that the front end shall be longer than 10mm.
The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage.
Connection between the water inlet hose jointer and the water faucet
1.Press the lower end of the lock lever and push down the slider. Take off the water inlet hose jointer from the
water inlet hose component. See to Figure 1.
2. Loosen the screw till the water faucet can be accessed. Put the jointer of the water inlet hose on the faucet.
See to Figure 2. (If the faucet is too large and the jointer can not be set on the water faucet, please loosen
the four screws and take out the bushing in the jointer. The front end of the faucet must be smooth,
otherwise it may leak water. See to Figure 3.)
water inlet hose jointer
Slider
Screw knife
Lock level
water inlet hose
Figure 1
3.Fasten the four screws evenly. See to Figure 4.
4.Take off the nameplate. Twist the fastening nut as per the indication of the figure
to seal up the exit end face of the faucet. See to Figure 5.
remark: Before installation, the threading is 4mmabove the upper surface of the nut.
After installation, the threading is 2mm above the upper surface of the nut. See to figure 6.
Figure 4
Water faucet,not suitable
Screw
Sign plate
Bushing
Figure 2
Figure 3
About 4mm before twisting
About less than 2mm after twisting
Screw nut
Figure 6
Figure 5
"Start/pause" button
"Power" button
After the power is switched on, press it to
Push the "power" button to switch on the power.
start the machine
Under power-on mode, push it to switch off the power.
During working, push it to pause.
Push the "power" button to switch on the power. If the
During pause, push this button to restart
"start/pause" button is not pushed, the machine will
and go on working
switch off the power automatically after 5 minutes.
STANDARD
COTTON
BLANKET
1HOUR
SAVE
2HOURS
SILK
"AIR-
Push the
Following full-auto program is available
indicator light
program is chosen.
Program
Application
inner tub and the outer tub, which can avoid
growing mildew on the outer tub and the inner
Standard
Common washing
tub.
Washing for coverlet, bigger ,heavy
Blanket
thickness laundries
Washing for the normal laundries
Save
in short time
Washing for silk textiles
Silk
Washing for cotton textiles
Cotton
DRY button
"
"AIR- RY"
D
button ,then the
"AIR- RY"
D
is on,
that means the "AIR- RY"
D
The purpose is drying the
Advertisement
