Haier HWM88VA User Manual

Semi auto washing machine

Advertisement

Quick Links

Trouble-shooting
If the laundries fall to the outer side of the spin tub
If the laundries fall to the outer side of the spin tub,
Please contact the after-sales service department.
(If there's breakdown, please pull off the power plug before checking) The following
phenomena are not breakdowns sometimes. Please confirm again before sending
it to repair. If there are real breakdowns, please come to the special maintenance
department or after-sale service department of our company. Do not repair it by yourself.
The reason
Phenomena
Is there power failure?
Is the power plug loose?
The machine does
Is the pulsator twisted by
not function.
foreign materials?
Has the drain hose being
laid down?
The draining does
Is the drain hose blocked
by foreign material?
not function
Are there any laundries
trapped at the outer side
of the spin tub?
Are there hair pin, coins
There's abnormal
or metal items brought
sound during
inside the tub?
washing
Is the machine slanting?
There's abnormal
Is the gland pressed evenly?
sound and violent
Are there any laundries trapped
vibration during
at the outer side of the spin tub?
spinning
Are the laundries in spin tub over
loaded?
How to settle
Use it when the power is on.
Insert the power plug tightly.
Remove the foreign materials?
Put down the drain hose?
Remove the foreign material?
Please contact the after-sales
service department.
Remove the hair pin, coins or
metal items
Pressed the gland evenly
Level the machine properly.
Remove the laundries
Remove a little laundries
14
USER
WASHING MACHINE
SEMI AUTO WASHING MACHINE
HWM88VA
Manual
CONTENTS
Packing list
Specification
Names of the parts
Safety precautions
Installation and adjustment
Preparation before washing
Do s and don ts
Usage of the detergent
Washing sequence
Maintenance
Trouble-Shooting

Advertisement

Table of Contents
loading

Summary of Contents for Haier HWM88VA

  • Page 1: User Manual

    Trouble-shooting SEMI AUTO WASHING MACHINE If the laundries fall to the outer side of the spin tub HWM88VA If the laundries fall to the outer side of the spin tub, Please contact the after-sales service department. (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes.
  • Page 2: Packing List

    Ï ´ º ó ´ ¦ À í Ï ´ º ó ´ ¦ À í × ° Ï ä Ë µ Ã ÷ Packing list Cleaning the overflow filter Quantity 2. Take off the corrugation pipe. Name Water level Dismantle the upper part of the adjusting lever One piece...
  • Page 3: Names Of The Parts

    Ï ´ º ó ´ ¦ À í Maintenance Names of the parts Ï ´ º ó ´ ¦ À í After using, please clean the lint and eyewinker of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning.
  • Page 4: Safety Precautions

    × ¢ Ò â Ê Â Ï î Safety precautions Please insert the power cord into When the machine is normally special receptacle with rated vol- using, please put the power plug tage.Be sure to use single-phase at the location easily to be insert- three pins receptacle.The earthing ed and extracted by hand.
  • Page 5: Rinse With Water-Filling

    × ¢ Ò â Ê Â Ï î Safety precautions Rinsing Do not stretch hands into the working Do not decompose, repair or alter the machine. It is dangerous even if the machine by yourself. rotation is slow. Take special care of Rinse with water-filling the children.
  • Page 6: Installation And Adjustment

    Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating Midway spinning the machine. Install the lint filter 1.Put the laundries into the spin tub evenly and smoothly. After opening the package,please take out the lint 2.Spin filter from the document bag,install it to the overflow...
  • Page 7: Washing Sequence

    Washing sequence How to change the direction of the drain hoses Wash timer Wash selector Wash selector Spin timer Spin timer Figure 1 indicates the ex factory installation (Strong current, (Strong current, Side sectional view (To set to below 2 minutes, (to set to below 1 minute, (to set to below 1 minute, position of the drain hose.
  • Page 8: Preparation Before Washing

    Preparation before washing Do s and Don ts Ï ´ Ç ° × ¼ ± ¸ Ï ´ µ Ó Ð ë Ö ª The capacity of washing and spinning of the Preparation before washing machine refer to the weight of the 1.Connect the water inlet hose.

Table of Contents