I
C
NSTALLING THE
AMERA
1
Select the position for the camera and secure the camera bracket.
Screws and anchors are supplied. Use an appropriate screw type for the mounting surface
2
Loosen the T-bolt.
3
Adjust camera to the proper view angle and tighten the T-bolt.
Make sure the lens is upright relative to your subject (antenna should be relatively upright).
4
Connect the camera to power using the supplied power cable and adapter.
The power adapter is not weather resistant and needs to be sheltered from moisture, rain,
and sunlight.
T-bolt
4
Setting Up Your A-520 Camera
Model A-520 User's Manual
camera bracket
power cable