Page 1
Full Automatic Washing Machine User's manual This manual is for HWM60-20B Please read this manual carefully before using. Retain it for future reference. 0030507862...
Contents Specifications...the 2 Names of the parts...1 Safety precautions ...2 Installation and adjustment ...4 Preparation before washing ...8 Put in the laundries ...9 Usage of the detergent ...9 Use the operation buttons ...10 Close the top lid ...13 Finish washing ...13 Disposal after washing ...14 Trouble shooting Answer to question...15 Packing list ...16...
Names of the par ts Top lid Detergent box Control panel Liquid detergent inlet Lint filter (Installed by user) Filter cover Inner tub Pulsator Control panel film Cabinet Notes: All illustrations in this Manual are given for reference only. Your products and accessories may show differences from these illustrations due to our continuous improvement.
Safety precautions Please plug the plug on special receptacle with rated voltage. Be sure to use single- phase three pins receptacle. Ensure the earthing prong of the power receptacle is earthed reliably. Use leakage protector if possible. Do not damage the power cord, bend ,extend, twist, bind or alter it by force. Do not press or nip it with weight.
Page 5
Safety precautions Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children. Do not let the children climb the washing machine. Do not put any hot or heavy items (such as the kettle with hot water ) on the washing machine.
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter Push the lint filter downward to location for lint filter. Install the bottom plate After you open the package, please lean the washing machine gently down on soft...
How to change the direction of the drain hose 1.Dismantle the back cover of the washing machine. 2.Put down the drain hose. Take off the drain hose frame. As indicated in Figure 1, put the drain hose into the cabinet. Then stretch one hand into the cabinet to nip the claw of the drain hose bush- ing to remove the claw from original...
Install the water inlet hose Confirm the water tap Water tap,suitable It is required that the front end shall be longer than 10mm. The outlet end surface of the tap shall be flat and smooth. If not please file it to avoid leakage.
Connection between the water inlet hose and the washing machine 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2.Put the nut of the water inlet hose on the valve jointer.
Preparation before washing Pay attention to followings before washing the laundries Confirm Clear the pocket. there's special Take out the requirement for coins , sand, the laundries. hairpins etc. A. Please check if the laundries are applicable for washing. b.Separate those not colorfast from other laundries. C.
Put in the laundries Usage of the detergent Access for softener Access for detergent Washing powder box How to use the softener See to the manual of softener for the usage and dosage. When adding softener into softener inlet of washing powder box, not that it shall not exceed the lower side of the water cap.
Use the operation buttons Description of the function of the buttons Mode and meaning of the indicator Flash : indicating the running mode On: indicating the mode about to run The following five programs are available for your option Standard Common washing Heavy Washing the heavy clothes...
Page 13
Steps of using the operation buttons and description of the steps PROGRAM PROCEDURE SPIN Push the "POWER ON/OFF " button to switch on the power. It has the special power resume function. In the case of power failure or the power plug is loose during washing, the machine can save the running program, and resume the program after the power supply is recovered.
Page 14
Attention Even there's no water in the tub, a certain period is required before spin starting. Do not use the soak program for the woolen textiles. Separate the laundries that are not colorfast from other laundries in washing. The pulsator will not rotate unless the water is filled to selected water level. Procedure selection method Times of pushing the Selected procedure...
Push the "reserve" button to select suitable • •• reserve wash program After switching on the power, the reserve program is set to off mode automatically. If you need to set the washing procedure to be finished at reserved time, please push the " reserve " button to set the reserve wash program. Refer to reserve button in Page 10 for selection Confirm the operation of reserve program When the RESERVE function is activated, the digitron of...
Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Clean the detergent box and set it on the control panel seat.
Trouble-shooting Answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself.
Packing list Name User's manual Guarantee Components of the water inlet hose Lint filter Bottom plate Tapping screws Full automatic washing machine Quantity Seven...