Servicing Your Venta-Airwasher - Venta Airwasher LW24Plus User Manual

My Venta-Airwasher appears to not be humidifying my room as desired?
Our goal is to achieve 100% customer satisfaction. Initial product performance is largely
based on room size and the overall humidity level of the contents within a room. Dry fur-
nishings (textiles, leather, wood, books, etc.) will require a longer period of time to absorb
moisture until their humidity level is increased to a satisfactory level. Therefore, we highly
recommend that you take this into consideration when evaluating the performance of your
product. Dry rooms can take up to one week of continuous adding of humidity to achieve
an optimal humidity level. Important is that you are adding water to your unit regularly. In
the event that you are dissatisfied with the performance of your product, please call us.

Servicing your Venta-Airwasher

Cleaning the gear
Do not submerse the gear in water. To clean any buildup of calcium or lime from the gear
"teeth", brush with a soft bristled brush. The gear teeth should be pointed toward the floor
while brushing, otherwise deposits will fall into the gear and cause it to malfunction.
Removal of gear and coupling
1 Switch the unit off.
2 Unplug the switching power supply from the A/C outlet.
3 Remove the motor housing from the upper housing.
4 Remove the coupling from the gear by pushing the coupling down toward the fan and
away from the gear.
5 Pivot (turn) the gear 90 degrees so it is laying on its side.
6 Gently pull one of the two motor housing arms approximately 1/8 of an inch away from the
gear and remove the gear from the motor housing.
7 Remove the locking ring from the center shaft of the fan by prying it up using a small
screwdriver.
16
4
6
5
7