1. Press
HI/LO
perature limit (
set the high humidity limit (
flashes), t hree times to set the low
temperature limit (
four times to set the low humidity
limit (
LO
Note: If you do not press a button for
about 16 seconds, the main unit
returns to normal display.
2. Repeatedly press
alarm temperature or humidity set-
ting 1.8°F (1°C) at a time. Hold
down
degree increments.
Notes:
• When setting the alarm, the lower
limit starts at
28
once to set the high tem-
flashes), twice to
HI
LO
flashes).
to increase the
to increase the setting in five
– --- °C
Operation
HI
flashes), or
(
– ---