Radio Shack Wireless Indoor/Outdoor Thermometer Owner's Manual page 27

midity flash. To silence the alarm sooner,
press any button on the main unit.
If a channel other than channel 1 is se-
lected when the alarm sounds, the dis-
play switches to channel 1 and the
readings flash. The alarm sounds for
about 1 minute. To silence the alarm
sooner, press any button on the main
unit.
The alarm sounds again if the current
reading falls below the set limit, then
meets or exceeds the set limit again.
Note: If the main unit detects another set
limit, the alarm continues to sound for
about 1 more minute.
Follow these steps to set the alarm.
27
Operation