Specifications - Samson Q snare Owner's Manual

The QSNARE can be connected to any mixer, mixer/amplifier, or mic preamp
using a standard microphone cable. As shown in the wiring diagrams below, con-
nect the female XLR end directly to the QSNARE's gold-plated connector and
the other end (normally a male XLR end, although some mixers use 1/4" connec-
tors) to the mixer, mixer/amplifier, or mic preamp.
QSNARE Specifications
Type
Polar Pattern
Frequency Response
Sensitivity
Raded Impedance
Max. SPL
Weight
QSNARE Specifications
Dynamic Microphone
Super Cardioid
50~16000 Hz
-55 dBV/pa (0.78mv/pa)
200Ω
133 dB (THD≤ 0.5% 1000 Hz)
150g (with DMC 100)
7