Retrieve And Read E-Mail - Nokia 770 User Manual

E - m a i l
Incoming server
IMAP4 server that receives your e-mail.
Outgoing server (SMTP)
server through which your e-mail is sent. Tap Next.
Simple mail transfer protocol (SMTP) servers are used when sending
e-mail. To be able to send e-mail, you must define the SMTP host
name or IP address, which you obtain from the service provider of the
connection you use.
Tip: The SMTP host name or IP address may be different from
the host name or IP address of the incoming server (POP3 or
IMAP4). For example, once you access your Internet service
provider e-mail over a cellular network, you may need to
utilize the SMTP server of the cellular network. Thus, you may
need to configure as many mailboxes as you have Internet
access networks, each mailbox having different SMTP host
name or IP address.
3. Tap Finish to complete the mailbox setup or
optional e-mail settings. For more information on advanced e-mail
settings, see the help of the application.

■ Retrieve and read e-mail

E-mail sent to you is not automatically received by your device, but
by your remote mailbox on the e-mail server. To read your e-mail, you
must first connect to the mailbox and retrieve the e-mail messages
to your device.
To retrieve e-mail from a remote mailbox, select
Send and receive. Select to retrieve e-mail from all mailboxes or
from a selected mailbox. If you have e-mail in the outbox folder,
these messages are sent simultaneously.
To open a message, tap twice the header of the message you want to read.
36
— Enter the host name or IP address of the POP3 or
— Enter the host name or IP address of the
Advanced to define
E-mail > E-mail >