Edit An Existing Wlan Connection; Create A New Cellular Connection - Nokia 770 User Manual

The security level of the network affects the settings that are
shown when you tap Next.
• Name of the WLAN network
• WLAN signal strength
• , if the WLAN network is already defined for an Internet
connection setup that you have saved in the device
2. Tap Finish to save the settings. To define advanced settings, tap
Advanced. For more information, see the help on Internet settings.
Tip: You may need to define advanced settings if, for example,
your Internet access requires the use of proxies.

■ Edit an existing WLAN connection

The following settings are shown when you edit an existing WLAN
connection or when you skip the scan for WLAN networks:
Network name (SSID):
previously defined connection.
Network mode — Select between
The Infrastructure mode is used with the Internet connections.
Security method: — Select
WPA pre-shared key
Tip: The device supports wired equivalent privacy (WEP) with key
lengths of 40, 104 bits (equal to 64, 128 bits depending on the
WLAN access point manufacturer).
For example, in the access point, select 40 (64) bits and enter 5
characters. In the device, select correspondingly 40 bits and enter
the same 5 characters.

■ Create a new cellular connection

Before you can open an Internet connection over a cellular network,
you must pair a compatible mobile phone with your device. Your device
needs an external modem (phone), which is connected to your device
with Bluetooth wireless technology.
— Shows an empty field or the name of the
Infrastructure
None (no security),
(high security), or WPA with EAP
A c c e s s t h e I n t e r n e t
and Ad hoc modes.
WEP (medium security),
(high security).
27