Charge The Battery; Insert The Memory Card - Nokia 770 User Manual

G e t s t a r t e d

■ Charge the battery

Check the model number of any charger before use with this device.
This device is intended for use when supplied with power from the
Nokia AC-4 and DC-4 chargers.
Warning: Use only batteries, chargers, and enhancements
approved by Nokia for use with this particular model. The use
of any other types may invalidate any approval or warranty,
and may be dangerous.
1. Connect the charger to a wall outlet.
2. Connect the power cord to the
charger connector at the base of
the device. Do not attempt to
connect the power cord to the
headset jack to the right of the
charging port. Once the power cord
is connected, the battery indicator
bar starts scrolling on the screen.
You can use the device while charging. When the battery is fully
charged, the bar stops scrolling.
For availability of approved enhancements, please check with your
dealer. When you disconnect the power cord of any enhancement,
grasp and pull the plug, not the cord.
For more information, see "Battery information", p. 48.

■ Insert the memory card

An RS-MMC and an adapter are supplied with the device. The RS-MMC
is physically smaller than a full-size MMC. You can only use FAT 16/32
formatted memory cards with this device.
Use only compatible RS-MMCs with this device. Other memory cards,
such as secure digital (SD) cards, do not fit in the MMC card slot and are
not compatible with this device. Using an incompatible memory card
may damage the memory card as well as the device, and data stored
on the incompatible card may be corrupted.
10