5.SETTING FAX FUNCTIONS (Cont.)
Setting the Line-2 Mode
The LIne-2 Mode settings are available only when the optional Fax unit and optional Line-2 board are
installed.
Installing the 2nd line board (option) allows transmission during reception, reception during transmission,
and simultaneous two communications of transmission/reception.
When the 2nd line is used, the following function setting and registration are required.
- Entering terminal ID
- Dial type setting
- Line-2 setting (following instruction)
- The 1st line takes precedence in the initial setting (not including the case that LINE 2 is selected in the
LINE SELECT when you register remote fax numbers into the address). If you want the 2nd line to have
4
priority in the initial setting, ask your service technician.
When the optional 2nd line board is installed, its operation can be selected from the following:
- Transmission/Reception
Both transmission and reception are available all the time.
- Reception only (24 hours)
The 2nd line is always standing by for reception.
- Reception only (timer)
Only reception is available during the specified period of time.
* Even during reception only, the specified line performs transmission if any line has been specified by the
options or address menu.
Entering Line-2 Mode Setting
1
Press the [FAX] button in the ADMIN
menu.
- The FAX menu is displayed.
To display the ADMIN menu, see "1.ENTERING TO ADMIN MENU".
Page 94
136
4.SETTING ITEMS (ADMIN)
Page 132
Page 134