Advertisement
D-Light Sync Pak
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.
2. Use a brush to wipe down the fan grill.
3. Clean the external optics with glass cleaner and a soft cloth
every 20 days.
4. Clean the internal optics with glass cleaner and a soft cloth
every 30-60 days.
5. Always be sure to dry all parts completely before plugging
the unit back in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
D-Light Sync Pak
Halogen Lamp Warning:
with halogen lamps which are highly susceptible
to damage if improperly handled. Never touch the
lamps with your bare fingers as the oil from your
hands will shorten lamp life. Also, never move the
fixture until the lamps have had ample time to cool.
Remember, lamps are not covered under warranty
conditions.
American DJ Supply
- www.americandj.com - D-Light Sync Pak User Manual Page 9
©
®
Cleaning
Halogen Lamp Warning
This fixture is fitted
D-Light Sync Pak
Caution:
Always replace with the exact same type lamp, unless oth-
erwise specified by an authorized American DJ
with anything other than the specified part can damage your unit and
will void your manufactures warranty.
Warning:
If after replacing the lamp you continue to blow lamps,
STOP using the unit. Contact customer support for further instruc-
tions, you may have to return the unit for servicing. Continuing to use
the unit may cause serious damage.
Lamp Replacement:
Caution! Never open the unit when it is in use.
Always disconnect the main power and allow the fixture ample time
to cool before attempting to replace the lamp. Lamp replacement has
been made simple by incorporating a split dome that is retained by a
single thumb screw. Again, please remember to always replace with
the exact same type lamp.
1. Be sure to follow the proper procedures when handling halogen
lamps. Never touch the new lamp with your bare fingers.
2. Unscrew and remove the two phillips screws located on each side
of the dome lens assembly.
3. Once the phillips screws have been removed, remove the dome
grill to expose the lamps.
4. Remove and replace the bad lamp or lamps with an exact match.
5. Reassemble in reverse order.
Fuse Replacement:
Disconnect from the main power supply. Insert
a standard flat head screw driver in to the fuse holder housing. Turn the
screwdriver in counter-clockwise direction to remove the fuse holder.
Remove the old fuse and discard it, replace the fuse with the same
type. Insert the fuse back into it's housing.
If you continue to blow fuses, STOP using the unit. Returning the unit
for servicing. Continuing to use the unit may cause serious damage.
Caution:
Always replace with the exact same type lamp and fuse,
unless otherwise specified by an authorized American DJ
American DJ Supply
- www.americandj.com - D-Light Sync Pak User Manual Page 10
©
®
Lamp & Fuse Replacement
technician. Replace
®
technician.
®
Advertisement
