Table of Contents
Advertisement
Troubleshooting
Problem
Detector beeps briefly at the same
location every day, but no radar
source is in sight.
Detector did not alert when a
police car was in view.
Detector's audible alerts become
softer after the first few alerts.
The power-on sequence reoccurs
while you are driving.
You wish to restore the factory
default settings.
The device will not turn on.
The display feels warm.
The display is blank.
ESCORT RADAR DETECTOR
Explanation/Solution
An X band motion sensor or intrusion alarm is located
within range of your route.
VASCAR (Visual Average Speed Computer and
Recorder), a stopwatch method of speed detection,
may be in use.
Officer may not have radar or laser unit turned on.
Detector is in AutoMute mode. See "AutoMute" in the
Settings & Preferences section for details.
A loose power connection can cause PASSPORT Max
to be briefly disconnected and will retrigger the
power-on sequence. Check all connections.
Press and hold the SEN and BRT buttons while
powering on the detector. A "Restored" message will
display, acknowledging the reset.
Check that vehicle ignition is on.
Check all connections.
It is normal for the device to feel warm.
PASSPORT Max is in Dark mode. Press the BRT button
to adjust the brightness.
GPS RADAR DETECTOR
Advertisement
Table of Contents
