Removing Viper V700 Series Under Windows Nt 4.0; Removing Diamond Software Tools - Diamond Multimedia Viper V700 SERIES User Manual

R V
EMOVING IPER
4.0
1. Select Start > Settings > Control Panel > Add/Remove Programs.
2. Click on the Remove the Product button.
3. Click Next.
4. When the uninstall is complete, Windows NT will automatically reboot.
To remove the hardware:
1. Shut down your computer.
2. Remove the computer case as outlined in the hardware installation instructions in
Chapter 2.
3. Ground yourself by touching the power supply box.
4. To remove the hardware, simply reverse the hardware installation procedures
from Chapter 3.
R D
EMOVING IAMOND
To remove InControl Tools 99 or the Diamond Update Wizard software, follow the
instructions for your operating system below.
Windows 98/95
1. From the Start menu, click Start > Programs > Diamond > InControl Tools 99
> Uninstall InControl Tools 99. The Diamond Install window appears. Click
Next.
2. Click the Remove the product button. A list is displayed with the software
components that will be removed. Click Next to remove all software in the list.
Note—If you only want to remove one product from the list, click Back and click
the Add/Remove components button. Select the item(s) you want to remove
from the checklist. Click Next to continue.
3. After the software has been removed, restart your computer.
Windows NT 4.0
1. From the Start menu, click Start > Programs > Diamond > DIAMOND Display
Component Uninstall. The Diamond Install window appears. Click Next.
2. Click the Remove the product button. A list is displayed with the software
components that will be removed. Click Next to remove all software in the list.
18
V700 S U
ERIES
S
OFTWARE
W
NDER INDOWS
T
OOLS
NT