Advertisement
controls and features
12V trigger
When a 12V signal is a applied to the trigger
input the subwoofer will switch on from
standby and the red active LED will illuminate.
Use a 3.5mm mono lead to make the connection
to an AV amp/receiver equipped with a trigger
output. (5-15V DC or AC may be used to trigger
the subwoofer, polarity is not critical).
line in
Line level stereo input with summing function.
high level inputs
High level inputs with summing function, for use
with amplifier speaker outputs.
power switch and socket
Unit should be switched off when not in use for
extended periods.
4
Advertisement
