BEC 5200 Series User Manual page 36

ADD Route
Destination IP Address：This is the destination subnet IP address.
IP Subnet Mask：It is the destination IP addresses based on above destination subnet IP
Gateway IP Address：This is the gateway IP address to which packets are to be
forwarded.
Metric：It represents the cost of transmission for routing purposes. The number need not
be precise, but it must be between 1 and 15.
Announced in RIP: This parameter determines if the Prestige will include the route to the
remote node in its RIP broadcasts. Set "Yes", it is kept private and is not included in RIP
broadcasts. Set "No", the remote node will be propagated to other hosts through RIP
broadcasts.
34