Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for BEC MX-1200
Summary of Contents for BEC MX-1200
- Page 1 BEC MX-1200 (4G/LTE) Gigabit Multi-Service Broadband Router Quick Start Guide...
-
Page 3: Package Contents
IF YOU NEED MORE INFORMATION ON THIS SOFTWARE CONFIGURATION, PLEASE REFER TO THE ONLINE USER MANUAL. Package Contents ✓ BEC MX-1200 (4G/LTE) Gigabit Multi-Service Broadband Router * 1 ✓ This Quick Start Guide *1 ✓ RJ-45 Ethernet Cable * 1 ✓... -
Page 4: Front Panel Connectors
Manually screw the mobile and/or GPS antennas tight to the female connectors for Antenna mobile connection 1 Connectors (Optional) MX-1200 Embedded as Secondary LTE Connectivity LTE 2 SMA female connectors (Main/GPS/Aux) Manually screw the 3G/4G and/or GPS antennas tight to the female connectors for... -
Page 5: Front Panel Leds
BEC MX-1200 (4G/LTE) Gigabit Multi-Service Broadband Router Front Panel - LEDs LEDS MEANING Green RSSI greater than -69 dBm. Excellent signal condition Green Flashing RSSI from -81 to -69 dBm. Good signal condition quickly LTE 1 / LTE 2 Red Flashing RSSI from -99 to -81 dBm. - Page 6 If only have one SIM card, insert it to SIM1. SIM1 / SIM2 Insert the mini SIM card (2FF) with the gold contact facing up. Card Slots Push the mini SIM card (2FF) inwards to eject it * Power off the MX-1200 before inserting or removing the SIM card(s)
-
Page 7: Hardware Connection
BEC MX-1200 (4G/LTE) Gigabit Multi-Service Broadband Router Hardware Connection LTE & GPS 2.4GHz and 5GHz Wi-Fi... -
Page 8: Hardware Installation
Quick Start Guide Hardware Installation Power Connection There are two power sources to power on the MX-1200. (1) DC power adapter or (2) Vehicle Electrical System A. Using the Supplied DC Power Adapter Attach the miniFIT-to-DC-Power-Cable to the 4-pin connector of the MX-1200. Then plug in the supplied power adapter to the wall and the power plug to the DC jack of the power cable to power ON the MX-1200. - Page 9 PC’s Ethernet interface. 3. WAN Link Interface and Connection BEC MX-1200 supports Internet failover and failback on multiple WAN interfaces, dual EWAN, Wi-Fi WAN and 4G/LTE (optional) <Please refer to User Manual for detailed Internet setup> A. Ethernet WAN Connections MX-1200 supports dual WAN Internet connections;...
- Page 10 Quick Start Guide B. Wi-Fi Connection (Client Mode) MX-1200 also supports Wi-Fi as WAN known as Wi-Fi Client. The Wi-Fi client connects to a remote Wi-Fi Access Point (AP) for remote network or Internet access. MX-1200 supports both 2.4GHz and 5GHz. Currently, the Wi-Fi client only available in the 2.4GHz band.
- Page 11 BEC MX-1200 (4G/LTE) Gigabit Multi-Service Broadband Router 4. B for Network File Sharing BEC MX-1200 has built-in FTP and Samba Servers, simply plug in an external USB HD then follow the instruction setup in the User Guide.
-
Page 12: Connecting To The Router
Quick Setup Your Router Use the Quick Start for fast connection setup. Wired Broadband Connection - before start configuring the MX-1200, make sure you have the EWAN(s) connected with your Internet box(es) or fiber line(s). Step 1: Change administration password Setup a new password for “admin”... - Page 13 BEC MX-1200 (4G/LTE) Gigabit Multi-Service Broadband Router Step 3: Setup Wireless Connection Access Point: select Activated SSID: Assign a unique name Channel: pick from 1~11 Security Type: select a mode - Disable (No security) - WPA - WPA2 (Most secure one)
-
Page 14: Troubleshooting
Quick Start Guide Troubleshooting 1. None of the LEDs are on when you turn on the router. Check the connection between the adapter and the router. If the error persists, you may have a hardware problem. In this case you should contact technical support. 2.