Toshiba 15V330DB Owner's Manual page 7

Connecting external equipment
Aerial cables:
Connect the aerial to the socket on the rear of the televi-
sion. If you use a decoder and/or a media recorder it is
essential that the aerial cable is connected through the
decoder and/or through the media recorder to the televi-
sion.
SCART leads:
Connect the media recorder IN/OUT socket to the televi-
sion. Connect the decoder TV socket to the television.
Connect the media recorder SAT socket to the decoder
MEDIA RECORDER socket.
Before running APS (AUTO PROGRAMMING SYSTEM) put
your decoder and media recorder to Standby.
A wide variety of external equipment can be connected to
the back of the television, therefore the relevant owners
manuals for all additional equipment must be referred to.
If connecting S-VIDEO equipment, set the INPUT for
S-VIDEO. See page 22.
If the television automatically switches over to monitor
external equipment, return to normal television by pressing
the desired programme position button. To recall external
to select between TV, EXT1,
equipment, press
EXT2, S-Video, PC RGB or DTV.
IB-20&23790W-(UKDVB-T)-1704UK-(CT8003)-MB22-(AUTN-SAM)-10048616&17-50105920 MB21 PANEU IDTV OLACAK 10050541 15V330DG.p65
Connecting the PC via PC input
• Power off both computer and TV before making any con-
nections.
• Connect the PC cable to the PC input of your TV and to the
15-pin connector on the rear of your computer.
• Tighten the screws on the plugs until the connectors are
fastened securely.
• For PC sound, use stereo jack socket located at the rear
side of the TV.
English - 6 -
6
,
continued
13.06.2007, 15:36