Troubleshooting; Battery Pack; Recording; Card - JVC Everio GZ-MS250 User Manual

Battery Pack

Unable to turn on the power when using the battery pack.
Recharge the battery pack.
"Charging the Battery Pack" （A P.11）
If the terminal of this unit or the battery pack is dirty, wipe it with a cotton
swab or something similar.
If you use any other battery packs besides JVC battery packs, safety and
performance can not be guaranteed. Be sure to use JVC battery packs.
Short usage time even after charging.
Battery deterioration occurs when a battery pack is charged repeatedly.
Replace the battery pack with a new one.
"Optional Accessories" （A P.19）
Unable to charge the battery pack.
When the battery pack is fully charged, the lamp does not flash.
If the terminal of this unit or the battery pack is dirty, wipe it with a cotton
swab or something similar.
Using a non-original battery pack may result in damage to this unit. Be
sure to use an original battery pack.
The remaining battery display is not correct.
Remaining battery power is not displayed when the AC adapter is con-
nected.
If this unit is used for long periods of time in high or low temperatures, or
if the battery pack is repeatedly charged, the amount of remaining battery
may not be displayed correctly.

Recording

Recording cannot be performed.
Check the A/B switch.
"Interior" （A P.100）
Set to the recording mode with the L (Play) Button.
"Interior" （A P.100）
Recording stops automatically.
Recording stops automatically as it cannot be performed for 12 or more
consecutive hours according to specifications. (It may take some time to
resume recording.)
Turn off the power, wait for a while, and start recording again. (This unit
stops automatically to protect the circuit when the temperature rises.)
DIS does not work.
DIS does not work when recording still images.
The continuous shooting speed of still images is slow.
The continuous shooting speed will drop if this function is used repeated-
ly.
Continuous shooting speed may drop depending on the SD card or under
certain recording conditions.
The focus is not adjusted automatically.
If you are recording in a dark place or a subject that has no contrast be-
tween dark and light, adjust the focus manually.
"Adjusting Focus Manually" （A P.26）
Wipe the lens with a lens cleaning cloth.
Cancel manual focus on the manual recording menu.
"Adjusting Focus Manually" （A P.26）
Digital zoom does not work.
Digital zoom is not available in the still image recording mode.
Zoom operation is not available in time-lapse shooting. (Simultaneous still
image recording and DIS are also not available.)
To use digital zoom, set"ZOOM"in the menu to"90x/DIGITAL" or "800x/
DIGITAL".
"ZOOM" （A P.74）

Card

Cannot insert the SD card.
Make sure not to insert the card in the wrong direction.
"Inserting an SD Card (GZ-MS250/GZ-MS240/GZ-MS230)" （A P.13）
"Inserting an SD Card (GZ-MS210)" （A P.14）
Unable to copy to SD card.
To record to the card, it is necessary to perform media settings.
"REC MEDIA FOR VIDEO (GZ-MS250/GZ-MS240/GZ-MS230)" （A
P.95）
"VIDEO SLOT SELECTION (GZ-MS210)" （A P.95）
To use cards that have been used on other devices, it is necessary to for-
mat (initialize) the card using "FORMAT SD CARD" from media settings.
"FORMAT SD CARD" （A P.97）

Playback

Sound or video is interrupted.
Sometimes playback is interrupted at the connecting section between two
scenes. This is not a malfunction.
The same image is displayed for a long time.
Replace the SD card. (When the SD card is damaged, difficulty in reading
the data occurs. This unit will try to play back as much as possible, but it
will stop eventually if the condition persists.)
Execute "FORMAT SD CARD" in the media settings menu. (All data will
be deleted.)
"FORMAT SD CARD" （A P.97）
The motion is choppy.
Replace the SD card. (When the SD card is damaged, difficulty in reading
the data occurs. This unit will try to play back as much as possible, but it
will stop eventually if the condition persists.)
Execute "FORMAT SD CARD" in the media settings menu. (All data will
be deleted.)
"FORMAT SD CARD" （A P.97）
Cannot find a recorded file.
Cancel group display and date search functions.
"Searching for a Specific Video/Still Image" （A P.40）
Change the setting in "REC MEDIA FOR VIDEO" or "REC MEDIA FOR
IMAGE". (Files on other media are not displayed.)
"REC MEDIA FOR VIDEO (GZ-MS250/GZ-MS240/GZ-MS230)" （A
P.95）
"REC MEDIA FOR IMAGE (GZ-MS250/GZ-MS240/GZ-MS230)" （A
P.96）
"VIDEO SLOT SELECTION (GZ-MS210)" （A P.95）
"IMAGE SLOT SELECTION (GZ-MS210)" （A P.96）
Select "PLAYBACK MPG FILE" then search the video on the index
screen. (Video files that have damaged management information can be
played back.)
"Playing a Video with Defective Management Information" （A P.38）
No date/time display.
Set "ON-SCREEN DISPLAY" in the menu accordingly.
"ON-SCREEN DISPLAY" （A P.84）
Set "DISPLAY ON TV" in the menu to "ON".
"DISPLAY ON TV" （A P.94）
Images do not appear on the TV properly.
Disconnect the cable and connect again.
Turn off and on this unit again.
Images are projected vertically on the TV.
Set "VIDEO OUTPUT" in the connection settings menu to "4:3".
"VIDEO OUTPUT" （A P.94）

Troubleshooting

105