Getting Started
Inserting an SD Card (GZ-MS210)
Insert a commercially available SD card before recording.
This unit comes with two SD card slots.
When two SD cards are inserted, recordings can be continued on the oth-
er card even if one card is full.
"Types of Usable SD Card" (A P.14)
"Approximate Video Recording Time" (A P.36)
1
Close the LCD monitor.
.
2
Open the slot cover.
.
3
Insert an SD card into slot A.
.
Insert with the label facing outward.
●
Make sure not to insert the card in the wrong direction.
●
It may cause damage to the unit and card.
Turn off the power of this unit before inserting or removing a card.
●
Make sure that a card is inserted in at least one slot.
●
Recordings cannot be performed without any SD card inserted.
"Media Settings Menu" (A P.95)
Do not touch the metal contact area when inserting the SD card.
●
Memo:
To use cards that have been used on other devices, it is necessary to
●
format (initialize) the card using "FORMAT SD CARD" from media set-
tings.
"FORMAT SD CARD" (A P.97)
Removing the Card
Push the SD card inward once, then pull it out straight.
14
Warning
.
Types of Usable SD Card
The following SD cards can be used on this unit.
Operations are confirmed on the SD cards from the following manufactur-
ers.
Panasonic
●
TOSHIBA
●
SanDisk
●
ATP
●
SDHC Card
.
Use a Class 4 or higher compatible SDHC card (4 GB to 32 GB) for
●
video recording.
SD Card
.
This unit supports 256 MB to 2 GB SD cards.
●
Memo:
Using SD cards (including SDHC cards) other than those specified
●
above may result in recording failure or data loss.
Class 4 and Class 6 are guaranteed to have a minimum transfer rate of
●
4 MB/s and 6 MB/s respectively during reading or writing of data.