Connect Water Supply Line And Drain Hoses - Maytag DK724Q1ASS0 Installation Instructions Manual

• Slide dishwasher partway intothecabinet opening. Allow
foraccess t otheelectrical terminal box.
5. Connect the drain hose using one of the following options:
Option 1: Waste disposer no drain air gap
B
1. Connect water supply line to the water valve under the sink.
A. Hot water supply
2. Slide clamps onto drain hoses (Figure A). Do not cut drain
hoses.
3. Push hoses into Y drain connector until fully seated (Figure
B). Several "clicks" will be heard.
4. Slide clamps into position (figures C and D).
C D
A. For new construction, remove disposer plug.
B. Connect drain connector to waste disposer.
C. Tighten clamp.
Option 2: No waste disposer and drain air gap
g ¸¸. . .......... =
C
A. Drain hose connector
B. Drain air gap
C. Waste
Option 3: Waste disposer and drain air gap
A ...................................
A. Drain hose connector
B. Drain air gap
C. Waste
C
10