GE PVM2070 Installation Instructions Manual page 18

Installation Instructions
MOUNT THE MICROWAVE
OVEN
FOR EASIER INSTALIATION AND PERSONAL
SAFETY, WE RECOMMEND THAT TWO PEOPLE
INSTALL THIS MICROWAVE OVEN.
IMPORTANT: Do not grip or use handle
during installation.
NOTE: If vour cabinet is metal, rise tile nvlon
groi/lulet _lI'()/llld
tile power cord hole to prevent
cutting of tile cord.
NOTE: _4'e recommend using filler blocks if tile
cabinet fl'ont hangs below the cabinet bottom shell
IMPORTANT: If filler blocks are
not used, case damage may occur from
overtightening screws.
NOT]?:: When motmting
tile
ulicrowave oven,
thread power cord
through hole in bottom of
top cabinet. Keep it tight
throughout Steps 1-3. Do
not pinch cord or lifi
oven by pulling cord.
[]I,ifl microwave, it
tilt
fin'ward, and hook
slots at back bottom
edge
onto fimr
lower
tabs of mo/mting
_ Rotate front
of oxen
up against cabinet
bottoul.
[]Insert a sell=aligning screw through top center
cabinet hole. Temporarily secm'e tile oven by
turning tile screw at least two full turns after tile
threads have engaged. (It will be completely
tightened later.) Be sure to keep power cord
tight. Be careful not to pinch the cord, especially
when mom_ting flush to bottom of cabinet,
Cabinet Front
Cabinet Bottom Shelf
FillerBlock
T quivalent
to Depth
of Cabinet
Recess
Self-AligningScrew
MicrowaveOvenTop
_ Attach tile microwave oven to tile top cabinet.
[] Insert 2 self aligning screws
through outer top cabinet
holes. Turn two flfll turns on
each screw.
_ Tighten center
screw completel}.
[] Tighten tile outer two screws to tile top of tile
microwave oven. (While tightening screws, hold
the microwave oven in place against the wall and
the top cabinet.)
_ Install grease filters. See tile Owner's Manual
packed with tile microwaxe.
18