Adapting Blower For Recirculation - GE PSA1200 Installation Instructions Manual

Installation Instructions
ADAPTING BLOWER
FOR RECIRCULATION
NOTE:The exhaust adaptor with damper is not
needed for recirculating models. You may want
to save them for possible future use.
[_ Remove and save screws that hold blower plate
to the oven.
_ Blower P lateScrews
_-_ BackofOven
[_ Slide the blower plate from under its retaining
flange and lift it off. Remove and save screw that
holds the blower motor to oven.
Retaining
Flan_
BlowerPlate
/
Blower Motor
Screw
[_ Carefully pull out the blower unit. The wires
will extend far enough to allow you to adjust
the blower unit.
[_ Roll the blower unit 90 ° so that fan blade openings
are facing toward the front of the oven.
BEFORE:Fan Blade
Openings Facing Up
Roll I_
AFTER: Fan Blade
Openings Facing
Forward
NOTE: Hake sure wires remain routed in the grooves
of the motor frame.
2O