For Recirculation - GE JVM1540MP2SA Installation Instructions Manual

Installation Instructions
ADAPTING MICROWAVE
BLOWER FOR RECIRCULATION
_1_ Remove and the that holds the blower
save sciew
motor door closed on the back and the blower
retaining screw on the top of the dooL
Blower--_
Retaining
_.Blower
Screw
Blower M otor
"\ DoorRetaining
Back of Screw
Microwave
Oven
[]Open the blower door it the back
by lifting
up a15
of the microwave oven. Remove and save the
blower retaining screw.
.... Blower Retaining
Screw
[] Garefully pull out the blower unit. The wires
will extend flu enough to allow you to adjust the
blower unit.
_Roll the blower unit 90 ° so that fan blade openings
are facing toward the flont of the microwave.
R011 4__I_
NOTE: Make sure wires remain routed in the
grooves of the
motor
flame.
20